V1610 FR COVERALL
This vented coverall has a great look and fit. It features five pockets and concealed YKK® non-sparking front zipper and 100% brass press stud covered on the inside, so no brass comes in contact with your skin. Major seams are double-stitched, with stress points bar-tacked for added strength. 2'/50mm FR reflective tape applied to shoulders, arms and legs.
FLAME RESISTANT CATEGORY 2
MATERIAL
Daletec®, (Quality 10, 802536), FR 100% Cotton, 7.5 oz/yd²/250 g/m²
COMPLIANCE
EN ISO 11612, NFPA 2112 UL recognized component -fabric, IEC 61482-2 (Class 1)
TECHNOLOGIES
Flame Resistant Garment, Electric Arc Flash Protection, CAT2
FEATURES
- Two back pockets, right side with flap
- Elasticized waistband
- 2" (50mm) wide reflective FR striping around arms, legs and over the shoulders
- Two radio loops
- Under arm vents
- Concealed two-way, black high-density polyester coil zip with press stud closure
- One pocket on left arm
- Two chest pockets with flaps, right pocket with a concealed zip closure, left pocket with pen sleeve pocket
- Shoulder pleats for freedom of movement and comfort
- Two side pockets with hidden exterior-to-interior access
- Concealed back mesh vented panel
- Cargo pocket withconcealed zipand hook-and-loop closure on left leg
- Concealed press studs on cuffs
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.